Oracle-Solaris
Från wiki.soltec.se
Version från den 26 augusti 2017 kl. 20.08 av Js146669 (Diskussion | bidrag)
Disk Devices
Commands to display all disks on a system:
# cfgadm -s "select=type(disk)" # echo | format # format -e
Configure a disk to be used via iSCSI
# svcadm enable svc:/network/iscsi/initiator # iscsiadm modify initiator-node -A myclient # iscsiadm add discovery-address 10.211.55.200 # iscsiadm discovery -t enable # devfsadm -c iscsi
Replace a faulty disk c1t1d0 from ZFS pool testpool:
# zpool offline testpool c1t1d0 # cfgadm -c unconfigure c1::dsk/c1t1d0 # cfgadm -c configure c1::dsk/c1t1d0 # zpool replace testpool c1t1d0 # zpool online testpool c1t1d0
Mirror existing boot disk c3t0d0s0 with disk c3t2d0s0
# fdisk -B c3t2d0s0 # prvtoc /dev/rdsk/c3t0d0s0 | fmthard -s - /dev/rdsk/c3t2d0s0
On x86 systems:
# installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c3t2d0s0
On SPARC systems:
# installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk/dev/rdsk/c3t2d0s0
Networking - Manual Administration
Switch to manual network configuration:
# netadm enable –p ncp defaultfixed
Show physical network interfaces:
# dladm show-phys
Create interface with static IPv4 configuration:
# ipadm create-ip net0 # ipadm create-addr –T static –a local=10.9.8.7/24 net0/addr # ipadm show-addr
Create interface with DHCP configuration:
# ipadm create-ip net0 # ipadm create-addr –T dhcp net0/addr
Create interface with auto-generated IPv6 configuration:
# ipadm create-ip net0 # ipadm create-addr –T addrconf net0/addr
Configure default route:
# route –p add default 192.168.1.1
Activate DNS configuration:
# svccfg –s dns/client setprop config/nameserver = net_address: 192.168.1.1 # svccfg –s dns/client setprop config/domain = astring: “myhost.org” # svccfg –s name-service/switch setprop config/host = astring: \“files dns\” # svcadm refresh name-service/switch # svcadm refresh dns/client
Activate DNS configuration (alternate approach by editing /etc/resolv.conf and /etc/nsswitch.conf and then importing these modifications into SMF)
# nscfg import –f svc:/system/name-service/switch:default # nscfg import –f svc:/network/dns/client:default # svcadm refresh dns/client